Wacker PS 2 750 50mm/2in Submersible Pump 220V/60Hz

Lightweight, portable, single phase submersible pumps are designed to handle water and solids. Built for the demands of construction, mining, municipality and farm applications.

• Insulation on all conductors of the power cable are protected by a water block system to prevent wicking of water into the motor.
• Silicon carbide faced double mechanical seals run in an isolated oil-filled cavity, allowing for seal lubrication, cooling and overall motor protection.
• Preliminary v-ring or lip seal (depending on model) shields the mechanical seal from abrasive wear due to suspended debris in pumping fluid.
• Semi-open ductile iron impeller with replaceable/adjustable, stainless steel wearplate.
• Lightweight, compact design for easy transport and positioning of pump.
• Built-in thermal protection prevents motor damage due to impeller blockage, reducing service repairs.
• Heavy-duty power cord with strain relief resists pullout and abrasion reducing costly repairs.

Standard Package – PS 2 750 Above packages include electrical supply cable, operator's manual and parts book.

Description Metric Imperial Discharge diameter 50 mm 2 in Length x width x height 185 x 185 x 415 mm 7.3 x 7.3 x 16.3 in Operating weight 16,0 kg 35 lb Shipping weight (including packaging) 19,5 kg 43 lb Shipping size (LxWxH) 455 x 235 x 230 mm 18 x 9.3 x 9 in Max. head 18 m 60 ft Max. discharge 276 l/min 73 US gpm Max. pressure 1,8 bar 26 psi Solid size capacity 6,0 mm 0.2 in Motor type Single phase/60 Hz Voltage 220 V 220 V Current (full load/start @ 230V) 6,5/25,5 A 6.5/25.5 A Speed 3.370 1/min 3,370 rpm Max. power output according to DIN-ISO 3046* 0,75 kW 1 hp Cable length 15 m 50 ft Cable size 2,08 mm2 14 AWG Impeller material Ductile iron Impeller type Semi-open

Specifications may change due to continuous product development. * Actual power output may vary due to conditions of specific use.